Netgear R7000-Nighthawk Smart WiFi Router(AC1900) Review

The R7000 Nighthawk AC1900 Smart Wi-Fi Router from Netgear runs on a dual-core 1GHz processor, utilizes AC1900 Wi-Fi and Beamforming technology.

The R7000 Nighthawk AC1900 Smart Wi-Fi Router from Netgear runs on the dual-core 1GHz processor and AC1900 Wi-Fi technology to provide speed and performance that’s ideal for gaming and streaming HD video. It helps both 2.4GHz and 5.0GHz wifi frequencies, providing around 1900 Mbps (600 on the two 2.4 GHz band and 1300 on the 5.0 GHz band) data move rates.

The Nighthawk router utilizes Beamforming+ technology, and therefore unlike omnidirectional Wi-Fi which fans the signal out inside a range, it communicates directly with products such as for example tablets or smartphones and beams a sign specifically to these devices. This decreases interference and stronger, quicker, and more dependable connections. Cell phone Wi-Fi speeds are usually considerably faster than earlier technology because of the router’s high-driven amplifiers and antennas.

Design

At 11.2 x 7.3 x 2.0 inches, the black, angled Netgear R7000 appears like an inferior version of the business’s R8000. Three finlike antennas mounted on the back use beam-forming technologies to optimize the signal. They could be aimed to seize the strongest transmission or unscrewed and changed with third-party choices. The R7000 could be wall-installed or can take a seat on a shelf. Regrettably, its in-walls AC adapter, at 3.5 x 2.8 x 1.1-ins, is awkwardly big, and much more than two times how big is the Trendnet TEW-812DRU’s strength plug.

The trunk of the R7000 has 4-gigabit Ethernet ports but lacks the teamed higher-speed ports that the ASUS RT-AC87U has. There is a USB 2.0 port within the back, in addition to a USB 3.0 connection in leading for hard disks, memory keys, and printers. However, the R7000 does minus the Linksys WRT 1900AC’s eSATA port for straight plugging in a difficult drive.

Performance

Powered by way of a 1GHz processor with 256MB of RAM and 128MB of space for storage, the R7000 could work with 3 independent lanes associated with the data stream. The dual-band router tops out at a theoretical 1.9 Gbps of bandwidth.

In 5-GHz mode, the R7000’s capability to move 353.8 Mbps of information at 5 feet was well above the common throughput of 315.2 Mbps and ahead of the $300 R8000’s showing of 302.3 Mbps. The R700 was 2nd best when compared to ASUS RT-AC68U’s tag of 361.3 Mbps.
The router’s 91 Mbps of 2.4-GHz bandwidth was good sufficient for a middle-of-the-pack outcome, trailing the TrendNet TEW-812DRU (92.3 Mbps), but well prior to the RT-AC68U (74.9 Mbps).

Specifications

Wireless
Wireless Frequency Bands 2.4 GHz, 5 GHz Dual-Band
Number of Antennas 3
MU-MIMO Support None
WLAN Mode Wi-Fi 5 (802.11ac)
Supported Protocols DoS
IPv6
Antenna Placement External (Detachable)

Interface

Ports 1 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) (Uplink)
4 x 10/100/1000 Mb/s Gigabit Ethernet (RJ45) (Console)
1 x 5 Gb/s USB Type-A
1 x 480 Mb/s USB Type-A
USB Sharing Support Yes

Performance

Throughput 2.4 GHz: 600 Mb/s
5 GHz: 1300 Mb/s

Security

Guest Network Support Yes
Wireless Security WEP, WPA, WPA2, WPA2-PSK, AES
VPN Support Yes
Firewall Support NAT, SPI

Hardware

RAM 256 MB
Storage Capacity 128 MB
Processor 1 GHz Dual-Core
Supported IEEE Standards 802.11ac, 802.11a, 802.11b, 802.11g, 802.11n

Electrical

AC Input Power 100 to 240 VAC, 50 / 60 Hz at 1 A
DC Input Power 12 VDC at 3.5 A

Pros

  • Fastest peak throughput yet
  • Slick design
  • Front-mounted USB port
  • Class-leading USB network performance

Cons

  • Loses out at the range to AC1900 rivals
  • Asus & Linksys rivals offer easier setup
  • Premium pricing
Leave A Reply

Your email address will not be published.

en_USEnglish